Tassel Neck Pillow

Instructions

1. Using Sensations Angel Hair yarn, e-wrap the first row of the yellow loom.

2. Use a purl stitch on the remaining rows of the loom. To purl stitch, lay the wrapping yarn across the front of the pegs below the loops. Using the Knifty Knitter hook, go under the loop and pull the wrapping yarn up through the loop. Take the original loop off the peg and replace it with the loop that is pulled through. (See Purl Stitch on the Knifty Knitter page at www.ProvoCraft.com for step-by-step instructions with images.)

3. Purl stitch until knitting is 18" long or desired size. Remove knitting from loom loosely and sew up one end to make a pillow form. Stuff and sew up the other end.

4. Using Lion Brand Vanna's Choice yarn, make 4 tassels using the Pom-Pom and Tassel Maker. Attach one tassel to each corner of pillow.

What you will need:

Provo Craft Supplies

Knifty Knitter Long Loom Yellow Knifty Knitter hook Knifty Knitter Pom-Pom & Tassel Maker

Other Supplies

Crochet hook 1 skein Jo-Ann Sensations Angel Hair (3.5 oz/100g), Purple 1 skein Lion Brand® Vanna's Choice, Medium (3.5 oz/100g), #860-147 Purple Yarn needle Stuffing for pillow

Knifty Knitter Slippers Pattern

Instructions:

1. The instructions are written to fit a ladies size 8 or 9 shoe. You can adjust to fit your foot. Use 2 pieces of yarn for all of the slippers.

2. Knitting a flat piece of knitting using 30 of the pegs. Start on peg 1 and e wrap to peg 29 then wrap around peg 30, turn and reversing directions wrap back to peg one. Knit 15 rows.

3. You are knitting from the heel to the toe this may help if you can think of this.

4. You are now on the 15th row, decrease or take off the next 6 stitches. Knit to the end of the row and decrease off the next 6 stitches. Continue knitting on the 18 stitches for 18 more rows.

5. Fold in half and sew up the heel. Run a thread through the loops on the 18 pegs and pull tight. Sew up the top of the slipper to the arch or to the cuff.

6. Crochet a chain about 24 inches and thread through the ankle. Attach a pom-pom on the end of the chain and tie a bow.

Now put on your comfy slippers and relax!

What you will need:

Provo Craft Supplies

Using the red medium size Knifty Knitter loom Knifty Knitter pom-pom maker Other Supplies One skein of yarn Yarn needle Crochet hook

Knifty Knitter Baby Afghan

Instructions

Use 2 strands of yarn as one for the complete project. 1. Using the Knifty Knitter Round Loom Red (and all 31 pegs), panel knit four panels of knitting using the e-wrap. Knit first panel: blue yarn for 48 rows, white yarn for 10 rows, pink yarn for 48 rows, white yarn for 10 rows, green yarn for 48 rows, white yarn for 10 rows, and then yellow yarn for 48 rows.

2. Knit second panel: pink yarn for 48 rows, white yarn for 10 rows, green yarn for 48 rows, white yarn for 10 rows, yellow yarn for 48 rows, white yarn for 10 rows, and then blue yarn for 48 rows.

3. Knit third panel: green yarn for 48 rows, white yarn for 10 rows, yellow yarn for 48 rows, white yarn for 10 rows, blue yarn for 48 rows, white yarn for 10 rows, and pink yarn for 48 rows.

4. Knit fourth panel: yellow yarn for 48 rows, white yarn for 10 rows, blue yarn for 48 rows, white yarn for 10 rows, pink yarn for 48 rows, white yarn for 10 rows, and then green yarn for 48 rows.

5. Lay first and second panels face-up on a flat surface. Connect with a mattress stitch to hook them together. To use the mattress stitch, line up the matching white sections from the two panels. Thread a long strand of white yarn through your yarn needle. With the edges of the two panels side by side, sew with the yarn needle through the loops on either edge. Pull tight once you have sewn up the gap between the panels, knot, and weave any ends into the panels.

6. Using the yarn needle and the ribbon, sew over the seam. Sew in about every fifth row of knitting. You will be sewing one strand of ribbon one way, and then using a second strand of ribbon to sew the opposite direction (see close-up picture). Tie a bow on each end of the rows

What you will need:

Provo Craft Supplies

Knifty Knitter Round Loom Red Knifty Knitter yarn needle

Other Supplies

4 skeins yellow worsted weight yarn 4 skeins blue worsted weight yarn 4 skeins pink worsted weight yarn 3 skeins white worsted weight yarn Ribbon: white 1/4" or 1/2" ribbon (the 100% polyester ribbon will wash very well) I used: 4 skeins yellow worsted weight Jamie Classic by Lion Brand® Yarn 4 skeins blue worsted weight Jamie Classic by Lion Brand® Yarn 4 skeins pink worsted weight Jamie Classic by Lion Brand® Yarn 3 skeins white worsted weight Jamie Classic by Lion Brand® Yarn

Leg Warmers with Stripes

Instructions
1. Note: This set of warmers was made from the classic wool. They are nice and warm and the knitting looks great. Be aware, however, that when the wool is washed it might shrink. If you want them to stay the size that you have made them, they will have to be dry-cleaned.
2. 1. Using two strands of Natural Mix yarn as one, e-wrap (wrapping loops on pegs that look like series of lowercase e’s) two times around loom and knit off (pulling bottom loop over top loop and peg).
3. 2. Knit 10 rows and carefully reach inside loom and place loops from first row back over pegs. This makes brim or cuff for top of the leg warmer. Knit this row.
4. 3. Continue knitting until leg warmer is 14" long (or desired length) using following pattern: 6 rows Rich Red yarn Next 4 rows Natural Mix yarn Next 4 rows Rich Red yarn Next 4 rows Natural Mix yarn Next 4 rows Rich Red yarn Next 4 rows Natural Mix yarn Next 4 rows Rich Red yarn Next 4 rows Natural Mix yarn Next 4 rows Rich Red yarn Next 4 rows Natural Mix yarn Next 4 rows Rich Red yarn Next 4 rows Natural Mix yarn Next 6 rows Rich Red yarn Next 6 rows Natural Mix yarn
5. 4. Using crochet hook, take first two loops off loom and pull second loop through first. Continue on around to take all loops off loom.
6. 5. Knit second leg warmer using directions above. Add beads, button, bells, or whatever you would like to decorate.
What you will need.
Provo Craft Supplies
Knifty Knitter ® Long Loom - Pink Knifty Knitter hook
Other Supplies
1 skein Patons® Classic Merino Wool Rich Red 1 skein Patons® Classic Merino Wool Natural Mix Crochet hook Yarn needle

Knifty Knitter Flag Blanket

This project measures 40.5" x 60" -- This project is done in panels and can be easily taken with you in your travels.

Instructions:

1. You will be using 2 strands of yarn as one throughout the entire project.

2. Split panels: Use the Knifty Knitter Round Loom in Blue and 2 strands of blue yarn to e-wrap 9 pegs. Wrap these 9 pegs then knit back and forth for 36 rows. Change to the red yarn and knit 54 more rows. Create 4 of these panels.

3. E-wrap the loom with the blue yarn and knit 36 rows then change to the white yarn and knit 54 more rows. Create 3 of these panels.

4. Long panels: E-wrap 9 pegs on the loom with the white yarn and knit 90 rows. Create 3 of these panels.

5. E-wrap 9 pegs on the loom with the red yarn and knit 90 rows. Create 3 of these panels.

6. Use the yarn needle and sew the stripes together to make blanket. Cut the 13 stars from felt and sew on with sewing thread and needle.

Note: When this blanket was first knit the designer knit the blue background using the Knifty Knitter Round Loom Yellow, all in one piece. Because the pegs on this loom are wider apart it knits a different gauge than the blue loom, which the stripes were knit on. The pegs are closer together on the smaller loom. It was very hard to make the blanket sew together right, so we have changed the pattern and hope that you will enjoy creating this fun blanket.

What you will need:

Provo Craft Supplies

Knifty Knitter ® Round Loom Blue Knifty Knitter yarn needle

Other Supplies

2 skeins blue yarn 4 skeins red yarn 3 skeins white yarn

Beaded Hat

Instructions

1. You will be making a regular hat just like the instructions that came with the looms.

2. Using one strand of the Jiffy yarn, thread on 93 beads. (This sample used mini pony beads'"white, yellow, green and blue.) String the beads on the yarn and push them down the yarn strand about 5 or 6 yards.

3. Knit 10 rows. On the 11th row, take the yarn to the outside of the loom and lay the yarn over the groove in the peg. The bead will position between the pegs.

4. Knit the loop over the yarn between the beads. Hold the yarn loosely when knitting the bead row.

5. Knit 3 rows and then another row of beads. Continue until you have 3 rows of beads on the brim of the hat. Knit one more row, then pull the inside of the hat up and put the bottom row on the loom to make the brim.

6. Continue knitting 15 more rows and string a piece of yarn through the loops on the loom and draw up to make the top.

7. Top knot: Using some of the left over beads, thread them on the yarn and wrap the yarn so that the beads end up in the middle of the loops (not all of the loops have beads). Tie in the middle and attach to the top of the hat.

8. This hat will fit a small child. The colors and the way you add the beads can make for a wide variety of styles and looks.

What you will need:

Provo Craft Supplies

Medium Knifty Knitter Loom (red) hook

Other Supplies

One skein of Lion Brand Yarn Jiffy (pastel yellow) Yarn needle Needle to string beads

V Neck Sweater

1. This a women's size large X-large

2. Body: using both yarns together wrap all of the pegs (41) and knit a flat piece until it is 17" long. Take the piece off of the loom by crocheting a single crochet in the first loop and continue to the next peg and crochet very loose, so that it does not pull up the knitted piece. You will need to make 2 pieces; one for body front and one for back.

3. Sleeves: using both yarns together wrap all of the pegs (41) and knit a two flat pieces until they are 12" long.

4. Construction: lay the front and back pieces together side to side. Put the binding off ends to the top. Sew with a yarn needle and one strand of yarn (the knitting worsted yarn is best) the side seams. See instruction diagram.

5. Mark the center front and back. Sew the sleeves from the centers to the under arm seam. See diagram. Put the bind off sides to the neck (these ends are a little more secure). Do a simple single crochet stitch around all of the outer edges, using one strand of the knitting worsted yarn.

What you will need:

Provo Craft Supplies

Knifty Knitter X-large Loom (Yellow Round) Knifty Knitter hook

Other Supplies

Crochet hook J or K size Yarn needle Pine Green - Red Heart Yarn (Weight 4) Bounce, Lion Brand Yarn (Bounce) Green tones

Backpack

Instructions

1. Using the yellow loom and using only one strand of yarn, wrap loom as picture shows. (Diagram #1)

2. Thread a yarn needle and starting as close to the center as possible, start to weave over and under, every 2 threads. (Diagram #2)

3. As you go around, you are weaving on an odd number of pegs (41 pegs). When you get back to the starting point, you will be going opposite over and under. (If you went over the first time you will be going under this row.)

4. Continue until you have as many rows as you can weave on the loom. It needs to be tight, but not too tight.

5. Leave the loops on the loom and wrap one more row on the loom. Knit the bottom loops over and continue knitting until your bag measures 17" or 55 rows of knitting. Crochet the loops from the loom loosely.

6. If you have to add yarn, be sure that you tie the new piece or pieces on inside the bag.

7. Measure 3 pieces of yarn 6' long and braid for the tie closer. Count down from the top of the bag 5 rows. Now weave the long braided piece in and out of the rows of knitting.

8. Using leather strips, braid them together and hook on to the bag as shown in diagram #3. Add your favorite possessions and you are on your way.

What you will need:

Provo Craft Supplies

Knifty Knitter extra large loom (yellow) and hook

Other Supplies

Yarn needle 2 skeins of Lion Brand Yarn CHUNKY USA (National Parks Green) Any bulky weight 5 yarn may be substituted.

Matching Hat and Scarf

Instructions
1. Scarf: Using the blue round loom, start with a yellow strand and a blue strand and continue to knit 10 rows. Then switch to both strands being yellow for another 10 rows, doing the same with two blue strands for another 10 rows. Because the yarn is corrugated your colors will vary in shade. Finish with 19 sections of color (19 sections of 10 rows a piece). This leaves you with a very thick tube scarf. For something a little less stiff use only one strand of yarn. Add fringe to the ends to give it a little more character or sew the ends together to close off the opening!
2. Double-sided hat: The key to making a double-sided hat is to make sure that you have the same amount of rows on both sides so that the designs do not overlap or show on the wrong side. Using the green loom, start by doing one strand of each color on one side. This consisted of 40 rows. Then begin the other side of the hat with two strands of yellow, which consisted of 10 rows. Switching to two strands of blue and knit 8 rows. Then switch to yellow, making 7 rows, and again blue with 8 rows. Finish with yellow making 7 rows. To close the hat off, used a blue strand of blue yarn to leave a fun little ring on the top of the hat. Note that this is a very big hat. It will be necessary to decide how many rows you will need to make a hat your size. Something else to keep in mind is that the color you finish with on your loom will become the top of your hat and NOT the rim. If you end up making the hat too large just roll it and have a brim! Enjoy!!!
What you will need:
Provo Craft Supplies
Knifty Knitter Green Round Loom and Hook Knifty Knitter Blue Round Loom
Other Supplies
Lion Brand Homespun Yarn- Delft(yellow) and Inca(blue)- four skeins (two of each color)

Horizontal Striped Hat

Instructions

1. Note: you may want to use the Green Loom which is the size that more adults make their hats, but the sample shown is an ex-large.

2. Using one strand each of Ranch Red and Burgundy knit 20 rows and make a brim, by pulling the first row back up on the pegs and knitting them over.

3. Pattern for the rest of the project: Change to the Spring Green and using 2 strands of yarn knit 5 rows, change to the Delft Blue and using 2 strands of yarn knit 5 rows.

4. Change to the Ranch Red and Burgundy and knit 15 rows. Repeat these three colors until you have 5 sets of knitting.

5. Finishing: Crochet the loops from the loom and sew the top flat.

6. Cut 7" pieces of yarn and using 6 pieces make fringe. Do one bunch of blue then a bunch of green across the top of the hat.

7. This is a very warm hat and scarf for those cold winter days. This project takes a little longer than most, but it is worth the time spent.

What you will need:

Provo Craft Supplies

Knifty Knitter ex-large loom (yellow) Yarn needle

Other Supplies

Crochet hook J or K Lion Brand Yarn Wool-Ease One skein of Ranch Red, Burgundy,Spring Green, Delft Blue

Baby Booties

Instructions

1. Using 12 pegs e wrap both strands around these pegs and turn and knit back and forth for 12 rows.

2. Take the beginning stitches and put them up and over the pegs as you would if you were making a brim on a hat, knit these stitches and continue knitting for another 12 rows.

3. Cut the yarn you are knitting with about 14" from the knitting. Using the yarn needle thread the end of the yarn back through the 12 loops on the pegs and pull tight for the toe.

4. Tie the yarn at the toe and then sew or weave up the top or front of the bootie.

5. Finish by chaining a piece of yarn about 12"long and thread through the fold on the top of the bootie. Make a pom-pom and tie on each end of the string. You could also use a piece of ribbon if you do not want to make the pom-poms.

What you will need.

Provo Craft Supplies

Knifty Knitter Flower loom (12 peg) and pick Using one strand of each Lion Brand Jamie Classic (Peppermint Pink) and Lion Brand Babysoft (Baby Print).

Bunny Tote

What you will need: Provo Craft Supplies: Knifty Knitter loom small (blue) Other Supplies: 1 Skein Baby Clouds Yarn by Red Heart Yarn (color of your choice) 1 Skein Fun Fur by Lion Brand Yarn (color of your choice) 18" of 1/4" or 1/2" satin ribbon your choice of color Glue gun and glue sticks 2 white pompoms for cheeks (or use the Knifty Knitter pom-pom maker) 1 small pink pom-pom for the nose Pink blush or pastel chalk 2 wiggle eyes 1" x 1" fun foam for teeth (optional) Instructions:

1. Purse Body: For this project, take the end of each of the two yarns and e wrap the blue round loom with them as if they were a single strand of yarn. Knit in a spiral until you have 8" of tube knitting on the loom. End with only one loop on each peg.

2.  Cut the yarn, leaving a 12 inch tail. Thread on a needle and pull through the loops on the pegs.

3.  Take the loops off the pegs. Pull the yarn tail tight. This will gather all the stitches to make the bottom of the bag. Do a couple of slip stitches in the bottom to tie off.

4. Ears: Wrap the yarn on 5 pegs and work back and forth, using these five pegs until you have knitted 7 inches.

5. Remove in the same method as the purse. Tie off. The top of the ears will be the tied-off end. -- Make 2 of these.

6. Handle: Use the same method, but only 3 pegs.

7. Work back and forth on these 3 pegs until you have 12 inches for short handle or 48 inches for long handle (remember that the handle may stretch, so you can make it a little shorter).

8. Sewing the parts together: Laying the purse flat, pin one side of the handle to the left inside top of the bag.

9. Pin the other side to the right inside top of bag.

10. Using only the Baby Cloud yarn, thread the needle and sew handle ends in place.

11. Place each ear next to the front of each handle; pin and sew in place.

12. Thread the ribbon on the needle and sew 1 inch from the top, starting in the center front and sewing completely around the bag.

13. This makes a draw-string effect to close the purse.

14. Pom-poms: Using the Knifty Knitter Pom-pom maker, you can choose the size you would like for the nose and the cheeks.

15. Glue the cheeks on using the glue gun and placing them close together. Glue the pink pom-pom in the middle of the cheek pom-poms. Joan Toczek knitted this adorable bunny tote and photographed her beautiful granddaughter holding it. She embroidered the eyes and made the teeth of folded over ribbon. She used pom poms for the cheeks and nose. Joan says that in a larger size, these would make great bags to carry Easter eggs for an egg hunt.

Child's Hair Scarf

Instructions

1. The main part of the knitting will be done on every other peg. This will make it very airy

2. Wrap the first three pegs and knit 10" or 11", back and forth.

3. Wrap the first three pegs skip the next peg and wrap around the next peg, turning back to the first 3 pegs.

4. Knit these loops and when you wrap again skip the end peg and wrap around the next and turn, continue adding a stitch on the one side until you have 10 pegs filled. Knit these rows even for 15 rows

5. Decrease one stitch on the right hand side, by turning on the last peg (make this last turning stitch very loose) and knit the next two stitches.

6. Using the crochet hook take the loop from the turning peg and pull the next loop through the end one and put the remaining loop back on the same peg. Keep this very loose

7. Knit even on the last three loops for about 10 or 11".

What you will need.

Provo Craft Supplies

Using the Knifty Knitter green long loom and hook

Other Supplies

One skein Water Wave Yarn by Lion Brand Yarn (only used a part of the skein) Yarn Needle Crochet Hook J or K

Scrap Mittens

Instructions

1. Right Hand Mitten: Using the blue loom and main color of yarn (burgundy) wrap 20 of the pegs and knit flat for 17 rows or the length you may want for the wrist.

2. Increase one stitch on each end of the knitting until the loom is full. Continue knitting in the round for 4 rows.

3. (1) Knit 3 stitches going counter clock wise, with the main color (burgundy). Change to the thumb color of yarn (brown). (2) Start on peg #1 and wrap to the peg #9.(3)

4. (4) Knit over pegs 4,5,6,7, of the main color of yarn (burgundy). Continue knitting on these 9 pegs for 14 or 15 rows. (5)

5. You will have the burgundy loops on the pegs 1,2,3, and 8,9. (6)(7) Just leave them on the pegs to hold them. (8) Continue knitting on these 9 pegs until your thumb is 3.5" long or about 12 rows. Leave a 14" piece of yarn and thread through the end of the thumb loops with the color yarn that you are using (brown). (9) (10)

6. (11) Pick up the main color yarn (burgundy) and wrap the 4 empty pegs and continue on around and knit 21 more rows. Use a 14" piece of yarn run through the loops on the top of the mitten and pull up tight.

7. Sew up the cuff and pull up the loops on the end of the thumb and sew down the inside of the thumb and around the bottom of the thumb.

8. Left Hand Mitten: Do the same instructions as the right hand until you get to the part of adding the thumb.

9. You will have knit the 4 rows in the round with all of the pegs knitted on. Wrap and knit to peg #13.

10. Change to the thumb color and wrap pegs 12 through 20. Knit over the burgundy stitches on pegs #14,15,16,17. Continue with the thumb on the 9 pegs numbers 12 thur20.

What you will need.

Provo Craft Supplies

Blue Knifty Knitter round loom and hook Yarn needle to sew with

Other Supplies

Any two colors or knitting worsted yarn Can be done with yarn left over from other projects

 

Short Shrug

Instructions

1. Body of shrug: Using 2 strands of yarn, wrap around the peg on the outside of the loom, leaving about 3 to 4 inches of tail hanging from the tack. This is your starting point.

2. Wrap the yarn counter clock wise around each peg, traveling in a clockwise direction; reverse on the last peg and wrap back to the first peg. Hold the loom so you are looking at the tack and the pegs are pointing upward.

3. Now using the hook tool, pick up the bottom loop or wrap of yarn and take over the top loop.

4. Wrap and knit until you have the length you would like for your shrug. To determine the size of the shrug, measure from your elbow, across the shoulders, and back to the elbow, for the main part of the shrug.

5. Removing: With a crochet hook, take the first loop from the peg and crochet, using the wrapping yarn through the loop.

6. Do a single crochet (wrap the yarn over the hook and draw the yarn through the loop on the hook) in between each of the loops on the pegs.

7. Cut the yarn attached and pull it all the way through the loop on the crochet hook. Pull it tight for a complete knot.

8. Cuff: Use the small loom (blue). Wrap completely around the loom and knit a circle for the cuff the length you would desire. Remove with a crochet hook the same as for the body of the shrug. You will need 2 of these. (Make sure they are the same size.)

9. Completion: Turn your shrug wrong-side out and using your same yarn, crochet both sides together to your desired length for the arms. Leave the ends open for your cuffs.

10. Turn the cuffs wrong side and crochet to the shrug. Seams may be pressed with steam from an iron, but DO NOT LET IRON TOUCH the shrug. Hand wash gentle.

What you will need.

Provo Craft Supplies

Extra Large round loom (yellow) and hook Small loom (blue)

Other Supplies

Crochet hook J or K size 2 skeins of Boucle by Bernat Yarn

Multi Colored Shawl

Instructions

1. This project can be as crazy as you want to go. You could use multiple colors or stay in the same color family. I'm always a little scared to try really far out combinations, but when I do, I really get a lot of comments.

2. Cut yarn in 3 yard pieces and arrange into the pattern of your choice. Each piece of yarn will make 2 rows of knitting.

3. First row: Using 2 of the 36" pieces of yarn, measure 18" of yarn and wrap around the peg on the outside of the loom. Wrap the last peg on the loom and turn around and go back to the first peg. Knit this row. There should be a 18" piece left on the end for the fringe.

4. Using the yarn of choice measure 18" and wrap around the peg on the outside and wrap the pegs. Knit and wrap back to the first peg. After the rows are started you can unwrap the yarn from the peg on the side of the loom.

5. After you have knit several rows you can go to the starting end and tie the 4 ends in a square knot. I used 2 strands of knitting worsted and one strand of knitting worsted and one strand of fun fur to knit together.

6. To take off of the loom cut the yarn pieces longer, measure off the 18" fringe piece and wrap and knit. When you have turned to go back, using the yarn single crochet the looms from the loom. You will need to crochet this side off very loose. Try to do both sides the same, tension.

7. The sample is 45" long, (you can make it as long as you would like). When you have done this shawl you will have the fringe finished too. Is that not great.

8. I made a square braid rope to hold the 2 corner together. Using 2 strands of the one main color, wrap 2 of the pegs on the loom in a figure 8 design knitting over the bottom loop when you have 2 loops on the pegs.

9. I knit this 15" long and tied on a tassel that is 6'? long. Thread the rope part of the knitting through the front corner of the shawl and sew on the corner of the back corner side of the shawl.

What you will need.

Provo Craft Supplies

X-large yellow Knifty Knitter loom and hook

Other Supplies

Left over pieces of yarn from other projects Crochet hook J or K size

Fuzzy Shrug

Instructions

1. You will be using the yellow round loom and 2 yarns - 1 Fun Fur and 1 Sparkle. If you decide to make a different colored shrug, use a yarn that coordinates with the fun fur.

2. E wrap the full loom with the 2 yarns, turning on the last peg and coming back to the first peg. Continue wrapping and knitting until you have 6 inches of knitting.

3. Like doing the brim on the hats, reach inside the loom and put the stitches from the first row over the pegs to form the cuff. Knit off this row. You will also have to stitch the sides together to make the cuff.

4. Change to the coordinating yarn and cutting the fun fur off, continue knitting until you have the desired length. Measure across your shoulders and consider that you have 3'? cuffs on the ends.

5. When you have knitted the desired length, add your fun fur back and discontinue one of the coordinating threads. Using both of the yarns knit the cuff for this end of the shrug. (This will be the brim for the second sleeve). Take the knitting off of the loom using the crochet hook and using single crochet Take the end of your sleeve and fold it and stitch it closed with the yarn to match the first sleeve end. Wash by hand.

What you will need.

Provo Craft Supplies

Ex-large Knifty Knitter loom (yellow) and hook Yarn needle

Other Supplies

Crochet hook J or K size 2 skeins of Boucle by Bernet yarn 1 skein of white Fun Fur and 2 skeins, white frost, Sparkle, Wool-ease from Lion Brand yarn

Black Spider for the Yellow Loom

Instructions

1. Body: Knit 25 rows in the round as you would for a hat, using 2 strands of yarn (leave a long tail on the winding peg to use in sewing up the bottom of the spider body).

2. Take the knit off the loom as you would a hat (take a 25 inch piece of yarn and thread it through top and bottom to remove from loom). Put stuffing in while still on the loom.

3. Legs: Make 8. Using the yellow loom, knit back and forth on 8 pegs for 47 rows and leave a long piece of yarn on the winding peg to sew up the legs. Take each leg off the loom as you would a hat. Fold legs horizontally and sew up

4. Take each leg, fold in half, then whip stitch for a fold or bend in the leg. Turn spider over and sew four legs on each side.

5. Hot glue two large wiggly eyes on top of spider near the front. (Use the size eyes you like, spiders have small eyes, but larger eyes show up better)

6. Note from Clella: This spider would be way cute if you used one strand of fun fur to make it hairy. Sit Samuel in the pumpkin patch of knitted pumpkins from our web-site here at Provo Craft. Have a Happy Halloween!

What you will need.

Provo Craft Supplies

Yellow Knifty Knitter Loom and hook

Other Supplies

2 skeins Red Heart Yarn 7 ounces Black Yarn needle 2 wiggly eyes (or more!)

Furry Leg Warmers

Instructions

1. Use two strands of yarn as one (one strand of Lemon and one strand of Spring Green). E wrap (wrapping loops on pegs that look like series of lowercase cursive es) two times around loom and knit off (pulling bottom loop over top loop and off peg).

2. Knit 10 rows and carefully reach inside loom and place loops from first row back over pegs. This makes brim or cuff for top of leg warmer. Knit this row.

3. Continue knitting until leg warmer is total of 14" long (or desired length).

4. Using crochet hook, take first two loops off loom and pull second loop through first. Continue on around to take all loops off loom this way.

5. Knit second leg warmer using directions above. Add beads, button, bells, or whatever you would like to decorate.

What you will need.

Provo Craft Supplies

Knifty Knitter® Long Loom Pink Knifty Knitter hook

Other Supplies

Lion Brand Jiffy® Lemon Lion Brand Homespun Spring Green Crochet hook Yarn needle

Cell Phone Cover

Cell Phone Tote

Instructions:

To make the bag:

1. Using Flower Loom, e-wrap (wrapping loops on pegs that look like series of lowercase es) 6 pegs and knit back and forth to make flap on pouch. Make it about 3" to 4" long (or desired length).

2. Continue around loom using all pegs and continue knitting rows, until bag measures around 4". Note: Depending on the type of yarn you choose to use, these 4" may be different number of rows.

To make the handle:

1. Using Knifty Knitter Spool Loom, drop yarn down through middle of loom. Wrap 2 rows on small end of loom and knit off (pulling bottom loop over top loop and peg).

2. Knit 28 rows (or desired length). Sew handles to side of pouch or attach to top of bag.

3. Add beads, buttons, sequins, or whatever you would like to embellish tote.

What you will need.

Provo Craft Supplies

Knifty Knitter® Flower Loom Knifty Knitter Spool Loom Knifty Knitter hook

Other Supplies

Crochet hook Yarn needle Bits and pieces of yarn