Matching Hat and Scarf

Instructions
1. Scarf: Using the blue round loom, start with a yellow strand and a blue strand and continue to knit 10 rows. Then switch to both strands being yellow for another 10 rows, doing the same with two blue strands for another 10 rows. Because the yarn is corrugated your colors will vary in shade. Finish with 19 sections of color (19 sections of 10 rows a piece). This leaves you with a very thick tube scarf. For something a little less stiff use only one strand of yarn. Add fringe to the ends to give it a little more character or sew the ends together to close off the opening!
2. Double-sided hat: The key to making a double-sided hat is to make sure that you have the same amount of rows on both sides so that the designs do not overlap or show on the wrong side. Using the green loom, start by doing one strand of each color on one side. This consisted of 40 rows. Then begin the other side of the hat with two strands of yellow, which consisted of 10 rows. Switching to two strands of blue and knit 8 rows. Then switch to yellow, making 7 rows, and again blue with 8 rows. Finish with yellow making 7 rows. To close the hat off, used a blue strand of blue yarn to leave a fun little ring on the top of the hat. Note that this is a very big hat. It will be necessary to decide how many rows you will need to make a hat your size. Something else to keep in mind is that the color you finish with on your loom will become the top of your hat and NOT the rim. If you end up making the hat too large just roll it and have a brim! Enjoy!!!
What you will need:
Provo Craft Supplies
Knifty Knitter Green Round Loom and Hook Knifty Knitter Blue Round Loom
Other Supplies
Lion Brand Homespun Yarn- Delft(yellow) and Inca(blue)- four skeins (two of each color)

Horizontal Striped Hat

Instructions

1. Note: you may want to use the Green Loom which is the size that more adults make their hats, but the sample shown is an ex-large.

2. Using one strand each of Ranch Red and Burgundy knit 20 rows and make a brim, by pulling the first row back up on the pegs and knitting them over.

3. Pattern for the rest of the project: Change to the Spring Green and using 2 strands of yarn knit 5 rows, change to the Delft Blue and using 2 strands of yarn knit 5 rows.

4. Change to the Ranch Red and Burgundy and knit 15 rows. Repeat these three colors until you have 5 sets of knitting.

5. Finishing: Crochet the loops from the loom and sew the top flat.

6. Cut 7" pieces of yarn and using 6 pieces make fringe. Do one bunch of blue then a bunch of green across the top of the hat.

7. This is a very warm hat and scarf for those cold winter days. This project takes a little longer than most, but it is worth the time spent.

What you will need:

Provo Craft Supplies

Knifty Knitter ex-large loom (yellow) Yarn needle

Other Supplies

Crochet hook J or K Lion Brand Yarn Wool-Ease One skein of Ranch Red, Burgundy,Spring Green, Delft Blue

Baby Booties

Instructions

1. Using 12 pegs e wrap both strands around these pegs and turn and knit back and forth for 12 rows.

2. Take the beginning stitches and put them up and over the pegs as you would if you were making a brim on a hat, knit these stitches and continue knitting for another 12 rows.

3. Cut the yarn you are knitting with about 14" from the knitting. Using the yarn needle thread the end of the yarn back through the 12 loops on the pegs and pull tight for the toe.

4. Tie the yarn at the toe and then sew or weave up the top or front of the bootie.

5. Finish by chaining a piece of yarn about 12"long and thread through the fold on the top of the bootie. Make a pom-pom and tie on each end of the string. You could also use a piece of ribbon if you do not want to make the pom-poms.

What you will need.

Provo Craft Supplies

Knifty Knitter Flower loom (12 peg) and pick Using one strand of each Lion Brand Jamie Classic (Peppermint Pink) and Lion Brand Babysoft (Baby Print).

Bunny Tote

What you will need: Provo Craft Supplies: Knifty Knitter loom small (blue) Other Supplies: 1 Skein Baby Clouds Yarn by Red Heart Yarn (color of your choice) 1 Skein Fun Fur by Lion Brand Yarn (color of your choice) 18" of 1/4" or 1/2" satin ribbon your choice of color Glue gun and glue sticks 2 white pompoms for cheeks (or use the Knifty Knitter pom-pom maker) 1 small pink pom-pom for the nose Pink blush or pastel chalk 2 wiggle eyes 1" x 1" fun foam for teeth (optional) Instructions:

1. Purse Body: For this project, take the end of each of the two yarns and e wrap the blue round loom with them as if they were a single strand of yarn. Knit in a spiral until you have 8" of tube knitting on the loom. End with only one loop on each peg.

2.  Cut the yarn, leaving a 12 inch tail. Thread on a needle and pull through the loops on the pegs.

3.  Take the loops off the pegs. Pull the yarn tail tight. This will gather all the stitches to make the bottom of the bag. Do a couple of slip stitches in the bottom to tie off.

4. Ears: Wrap the yarn on 5 pegs and work back and forth, using these five pegs until you have knitted 7 inches.

5. Remove in the same method as the purse. Tie off. The top of the ears will be the tied-off end. -- Make 2 of these.

6. Handle: Use the same method, but only 3 pegs.

7. Work back and forth on these 3 pegs until you have 12 inches for short handle or 48 inches for long handle (remember that the handle may stretch, so you can make it a little shorter).

8. Sewing the parts together: Laying the purse flat, pin one side of the handle to the left inside top of the bag.

9. Pin the other side to the right inside top of bag.

10. Using only the Baby Cloud yarn, thread the needle and sew handle ends in place.

11. Place each ear next to the front of each handle; pin and sew in place.

12. Thread the ribbon on the needle and sew 1 inch from the top, starting in the center front and sewing completely around the bag.

13. This makes a draw-string effect to close the purse.

14. Pom-poms: Using the Knifty Knitter Pom-pom maker, you can choose the size you would like for the nose and the cheeks.

15. Glue the cheeks on using the glue gun and placing them close together. Glue the pink pom-pom in the middle of the cheek pom-poms. Joan Toczek knitted this adorable bunny tote and photographed her beautiful granddaughter holding it. She embroidered the eyes and made the teeth of folded over ribbon. She used pom poms for the cheeks and nose. Joan says that in a larger size, these would make great bags to carry Easter eggs for an egg hunt.

Rectangle Shawl

Instructions

1. Using one strand of each yarn, e wrap the first 3 pegs and skip the next peg, wrap the next and skip the next peg. Continue until you have filled up the complete hoop.

2. Knit until you have about 50 inches of knitting or until you have used all of the mohair yarn. When crocheting the loops off of the loom, leave about 3 yards to crochet the loops off

3. Make the crocheting very very loose. Add 7 inch pieces of yarn for fringe. This project uses 3 strands in each fringe group.

4. The top of the shawl is the end with the 3 beginning stitches. These stitches pull the shawl together and make it hang on the shoulders.

5. Hook together with a cord or a brooch.

6. Wear for a special day or give as a great gift.

What you will need.

Provo Craft Supplies

Knifty Knitter extra large loom (yellow) Hook

Other Supplies

Yarn needle Crochet hook J or K size 1 skein Micro Spun by Lion Brand Yarn (Lilac) 2 skeins Moonlight Mohair by Lion Brand Yarn (color of your choice)