Knifty Knitter Spool Loom Projects

Free Patterns and Projects for the Knifty Knitter Spool Loom

The first thing you should know about a spool loom is that it has 2 ends and both may be used for knitting. There is a wide end and a narrow end. Spool looms are generally used for knitting long ropes or cables. For example, the strap of a loom knitted purse is often made with the spool loom. Here are a few patterns to get you started using your Knifty Knitter spool loom, including some ideas you wouldn't expect, such as a Valentine's Day card and a scarf! 

Braided Tube Scarf Pattern

for the Knifty Knitter Spool Loom

This scarf is made by knitting 5 long tubes on the spool loom and braiding them together along with some fun fur. It adds depth and dimension to the finished scarf. You can experiment by mixing and matching the knitted tubes in different colors. I've seen one done in the primary blue and yellow. It was adorable. This can be a very long project for a beginner, because it takes a while to make all the tubes.

Skill Level: Beginner

You will need:

* Knifty Knitter Pom Pom and Tassel Maker
* Knifty Knitter Spool Loom
* Knifty Knitter hook
* Yarn Needle
* 3 or 4 skeins of worsted weight yarn
* fun fur

Braided Tube Scarf for the Spool Loom
 

 This is the Knifty Knitter spool loom by Provo Craft. If you haven't seen one, you may not realize that they have 2 sides with pegs. One end is slight smaller than the other, so you can make 2 different widths of knit on the same loom. The smaller side can also be used to make the thumb of a mitten or glove.

Knifty Knitter 4-1/2 Inch X 8-1/2 Inch Spool Loom

 

 

 

Spool Loom Valentine

with the Knifty Knitter Spool Loom by Provo Craft

The cords around the edge of this precious Valentine's day card are knitted on the Knifty Knitter spool loom. The Valentine is a creation of Brenda at the "Loom Lore" blog.

Skill Level: Beginner
You will need:
*spool loom
*several colors worsted weight yarn
*a Knifty Knitter hook
*card stock
*craft glue
Lacy Valentine Scarflet from Loom Lore

More Free Patterns for Specific Looms

• 

  Knifty Knitter Blue Round Loom Patterns

  The Knifty Knitter blue round loom makes knitting hats for preemies and dolls easy and fast. Even if you have never knitted before, you will be able to lear...
• 

  Knifty Knitter Adult Hat Loom

  The first set of knitting looms that I bought in 2008 were the Knifty Knitter brand by Provo Craft. After knitting for a while, I soon learned that there ar...
• 

  Knifty Knitter Pink Long Loom Patterns

  The Knifty Knitter 10 inch long pink loom is popular for a couple of reasons. It's the smallest of the long looms, so it travels easily in a bag or purse. Y...
• 

  Knifty Knitter Blue Long Loom Patterns

  This is the very longest Knifty Knitter brand loom currently made. I use it often for making blankets. It measures 22 inches long. I use it to knit both sin...
• 

  Knifty Knitter Red Round Loom Patterns

  The Knifty Knitter red round loom is for you if you want to knit hats for young children. This loom makes knitting a hat for a baby, or toddler, a breeze. Y...
• 

  Knifty Knitter Rectangle Loom Patterns

  You can knit quickly and easily with the Knifty Knitter Rectangle loom. It is designed specifically for making scarves, blankets, and other types of double...
• 

  Knifty Knitter Straw Loom Instructions

  The Knifty Knitter straw weaver made by Provo Craft is not so much a knitting loom, as it is a weaving tool. If you've seen them, but you aren't quite sure...
• 

  Knifty Knitter Green Long Loom PatternS

  The long green Knifty Knitter loom made by Provo Craft is 18 inches long. You can buy it individually, or as part of the long loom set. There are some free...

  
  

  
  
  
  
  
  
  

  The Knifty Knitter Facebook Fan Page

  
  

  Visit and like the fan page to get free patterns in your Facebook feed.

  
  

  
  

Connecting Knifty Knitter Knit

Knifty Knitter Knitting Looms

Two common methods for attaching pieces of knit made on the Knifty Knitter loom are the mattress seam and the hidden seam. Mattress seams produce a neat seam that is barely visible on either side of the knit. The mattress seam works well for projects where both sides of the finished work will be seen, such as blankets. Hidden seams create an obvious seam, but the seam is turned toward the inside, such as the seam of a sweater where the arm meets the bodice.

Connecting Knifty Knitter Panels with the Mattress Seam

The mattress seam is barely visible and is a perfect seam for attaching several Knifty Knitter panels into a blanket.

1. Place the pieces of knit to be connected on a flat surface. The side most often seen should be facing up. The panels should be laying side by side.
2. Weave a needle through the center of the stitch on one knit and across to the center of the stitch on the attaching knit. In the center of each stitch, there is a small post, the yarn should be weaved around this post. Weave the yarn back and forth between the two panels. After you have done this approximately 5 times. Pull the yarn tighter to fully connect the panels.
3. Work attaching the seams of the knifty knitter panels weaving, then tightening the weave, working down the seams.
4. When the end of the seams are reached, tie a square knot and snip the yarn, weaving the excess yarn into the knit.

Connecting Knifty Knitter Knit with a Hidden Seam

The hidden seam will create a ridge and the bulk of the seam should be on the wrong side of the fabric, similar to a sleeve seam.

1. When removing each of the knits to be attached from the Knifty Knitter loom, weave a yarn of a different color through the loops to keep them from unraveling. This yarn is temporary and it is not important that it doesn't match. In fact, choosing a contrasting color makes it easier to see and remove the yarn later.
2. Place the right sides of the knit together and using a crochet hook feed one loop through the loop opposite it on the other knit.
3. In an alternating pattern feed the loops through each other until the end of the row is reached.

How to Increase Stitch or Decrease Stitch on a Loom

Increase stitches add to the width of a finished knitting project by increasing the number of stitches in a row. Decrease stitches reduce with width of the knit by making fewer stitches in the row. In knitting, these techniques of increasing and decreasing stitches are used to change shape, such as adding arms to a sweater. Projects requiring increase and decrease stitches can be done on a Knifty Knitter knitting loom by following a few simple steps.

Increase Stitch on the Knifty Knitter Loom

Increase stitches are used to add width, or flare to any knit project.

1. Begin the project as close to the center of the loom as possible. This leaves room on both sides of the row to increase width equally.
2. When the end of the row is reached, rather than turning and knitting off back across the row, use the yarn to wrap an additional peg.
3. Continue wrapping until the row has been increased by the number of stitches desired.
4. Continue knitting off back across the row.

Decrease Stitch on the Knifty Knitter Loom

Decrease stitches may be used to taper a waste line of a sweater, or narrow the wrist of a knitted arm.

1. When arriving at the row that is to be decreased, take the loop on the last peg of the row and unhook it. Place it on the previous peg in the row.Adding it to the previous peg, rather than simply dropping the stitch, prevents the finished knit from unraveling.
2. Repeat the step above until all the stitches that need decreased in the row have been removed.
3. When knitting off, knit off all the additional loops that have been placed on the end peg of the row, as one loop.

When creating increase and decrease stitches, the knit will stay symmetrical, or the same on both sides, if the same number of stitches are added or removed from each end. For example, when decreasing a row by 6 stitches, 3 stitches should be taken from each end of the row to keep the work balanced.When working with an odd number that must be increased, or decreased, for a row of knitting stitches, try to alternate the end of the row that gets the most increases or decreases. For example, if you are decreasing 5 stitches from a Knifty Knitter row take 3 from the left and 2 from the right side of the row. In the next row, if more stitches need to be decreased, and the total number of stitches removed is an odd number, take the extra stitch from the right side rather than the left.